Track Field surfaces

Top sporting achievements need top equipment. Regupol tartan® tracks maintain a top position among synthetic fl oors which are of prime importance for many of the world’s athletes. They are manufactured in accordance with IAAF quality criteria and in line with DIN V 18035-6 directives for synthetic surfaces in outdoor sports grounds. Regupol® athletics tracks are suitable for both international professional sports as well as for school and popular sports. Their material composition was developed in accordance with physical sports requirements and incorporates a balance between speed, non-slip qualities and shock absorption exactly rated to the physical constitution of athletes.

Regupol® AG

Regupol® AG is one of BSW’s most frequently installed track surfaces and meets the highest professional demands. Regupol® AG can be found in sports stadiums all over the world. The base mat of Regupol® AG consists of prefabricated rolls and is permanently bonded to the sub-base in situ with a special PUR adhesive. The EPDM granules of the wear layer are embedded into the liquid polyurethane layer to achieve a seamless sports surface. As a main advantage it must be pointed out that the prefabricated elastic layer is produced in accordance with strict quality specifications resulting in an extremely homogeneous surface with exactly the same thickness and the same physical properties all over. In addition, installation is a quick and low-cost procedure.

Material Composition

The wear layer is composed of mixed-size, spike-resistant EPDM granules embedded into liquid polyurethane. The elastic layer consists of prefabricated Regupol® rolls made from PURbonded rubber granules.

Sub-Base

Asphalt or concrete

Thickness

Standard offer: wear layer 3 mm, elastic layer 10 mm; other thicknesses upon request

Weather Resistance

UV-resistant, durable even in extreme heat, cold and moisture

Colours

Red, Green, Blue; other colours upon request

Performance Level

International professional competition, amateur competition, school and popular sports

1 Asphalt layer on gravel bed • 2 PUR adhesive • 3 Regupol® elastic layer, prefabricated • 4 Sealed pores of the Regupol® elastic layer • 5 Cast layer made of PUR • 6 Wear layer made of EPDM granules

Regupol® compact

Regupol® compact

stands out with its immense resilience under intensive use for both competitions as well as training sessions. Regupol® compact consists of polyurethane that is cast in situ with specially rated rubber granules to optimise shock absorption. The wear layer is identical to that of Regupol® AG and just as spike-resistant. Regupol® compact is installed in sports stadiums pursuant to the requirements of the IAAF.

Material Composition

The wear layer is composed of mixed-size, spike-resistant EPDM granules embedded into liquid polyurethane. The base layer consists of in situ cast PUR layers with rubber and/or EPDM granules.

Sub-Base

Asphalt or concrete

Thickness

Standard offer: wear layer 3 mm, base layer in 10 mm; other thicknesses upon request

Weather Resistance

UV-resistant, durable even in extreme heat, cold and moisture

Colours

Red, Green, Blue; other colours upon request

Performance Level

International professional competition, amateur competition, school and popular sports

1 Asphalt layer on gravel bed • 2 Sealed asphalt layer • 3 1st PUR cast layer with rubber granules• 4 2nd PUR cast layer with rubber granules • 5 Cast layer made of PUR • 6 Wear layer made of EPDM granules

Regupol® PD

Regupol® PD

possesses the same special spray coating as Regupol® PD IS. The spray coating is applied on top of the prefabricated homogenous Regupol® elastic layer and creates extremely homogeneous shock absorption. Regupol® PD is also the waterproof alternative to Regupol® PD IS and is suitable for both ambitious amateur competitions as well as for school and popular sports.

Material Composition

The wear layer consists of mixed-size, spike-resistant EPDM granules embedded into liquid polyurethane. The base layer consists of in situ cast PUR layers with rubber granules.

Type of installation

Surface type D according to EN 14877 : 2013-12

Sub-Base

Asphalt or concrete

Thickness Standard

offer: 13 mm; other thicknesses on request

Weather Resistance

UV-resistant, durable even in extreme heat, cold and moisture

Colours

Red, Green; other colours upon request

Performance Level

School and popular sports, and ambitious amateur competitions

1 Asphalt or concrete layer on gravel bed • 2 Adhesive • 3 Regupol® elastic layer • 4 Sealed pores of the Regupol® elastic layer • 5 PUR-EPDM wear layer

Regupol® AGM

The track surface Regupol® AGM

was specially developed as a training surface for long- and middle-distance runners. This surface has a clearly softer elasticity than other conventional synthetic track surfaces. The relatively high force absorption takes the strain off the musculoskeletal system of the athlete, preventing training-related injuries, pain and wear and tear. The elasticity of the floor also counteracts symptoms of fatigue that occur during long hours of training. The wearing layer of the surface is identical to the well-known Regupol® AG athletic track surface.

Material

Wearing layer made of polyurethane with interspersed EPDM granulate, spike-resistant. Base layer consisting of extra-elastic, pre-manufactured Regupol® courses made from PUR-bonded rubber granules.

Type of installation

Surface type D according to EN 14877 : 2013-12

Substructure

Asphalt, concrete and others on request

Thickness

Standard: 3 mm wearing layer, 10 mm base layer, other thicknesses available.

Weather conditions

UV-resistant, long service life, even under extremely hot, cold or wet conditions.

Colours

Red, Green, Beige and various shades of Blue; other colours upon request

Performance Level

Training surface for professional middle- and long-distance runners. Amateur sports, school sports and public sports facilities

1 Asphalt layer on sub-ballast • 2 Application of adhesive • 3 Coasting of the prefabricated base mat • 4 Closing of the pores of the base mat • 5 Application of liquid PUR coating • 6 Wearing Surface consisting of EPDM granules

Regupol® AG RC

Numerous older synthetic tracks are in the need of replacement. The Regupol® AG RC retopping product entails installing a new layer on the existing synthetic surface without removing the old elastic layer. At first it will be necessary to sand down and clean the wear layer of the existing surface. Afterwards the special PUR primer must be applied with subsequent installation of a self-levelling, seamless PUR coating into which the coloured EPDM granules are then embedded.

Finally, the tartan track will looks like new again, at a price well below the cost of purchasing a complete track. Preliminary tests show whether the existing surface is suitable for retopping. Among others, tensile strength and shock absorption have to meet the requirements. Regupol® AG RC can be easily installed on the worn synthetic tracks of various manufacturers. Regupol® AG RC offers the possibility to dispense with the lengthy, expensive construction of a new athletics track.

Material Composition

The wear layer is composed of mixed-size, spike-resistant EPDM granules embedded into liquid polyurethane. The already existing track forms the elastic layer.

Sub-Base

Asphalt or concrete

Weather Resistance

UV-resistant wear layer; durable even in extreme heat, cold and moisture

Colours

Red, Beige, Sky Blue, Blue, Dove Blue, Slate Grey, Light Grey, May Green, other colours upon request

Performance Level

Amateur competitions, school and popular sports, regional competitions

Regupol® Rolldown Runway

Regupol® Rolldown Runway is a slip-resistant and resilient surface for individual runways and short sprint lanes. It is laid onto existing surfaces or runways consisting of cinder or clay, as a cost-effective alternative to conventional track surfacing installations. It offers the same resilience, uniformity, and nearly identical physical properties. Regupol® Rolldown Runway is rolled out on site and accurately put in place manually. Due to its weight, the rolls lay flat. There is also the option of permanently bonding Regupol® Rolldown Runway onto an engineered sub base such as asphalt or concrete.

Material Composition Fully prefabricated Regupol® roll material made from PUR bonded crumb rubber and rubber granules.

Type of installation

Prefabricated rolls must be rolled out. The material is subject to a certain co-efficient of shrinkage and/or expansion when loose laid and particularly under outdoor conditions so Regupol® Rolldown Runway is typically not installed side-by-side but as a single runway equal to the width of one roll. Regupol® Rolldown Runway can also be fully bonded to an engineered sub base such as asphalt or concrete.

Sub-Base

Existing track and other existing synthetic sports surfaces, cinder tracks, asphalt or concrete.

Dimensions

Roll-width: 1,250 mm, Roll-lengths are variable between 20 and 50 linear meters. Standard thickness: 10 mm and 12 mm, other thicknesses on special request.

Properties

UV-resistant, durable under all weather conditions, waterpermeable when loose laid, spike resistant in 12 mm thickness.

Colour  - Black

Performance Level

Training at school and club level

Siekdami užtikrinti geresnę naršymo kokybę, naudojame slapukus. Toliau naršydami mūsų svetainėje sutinkate su jų veikimu. Kitu atveju galite pakeisti savo naršyklės nustatymus ir atsisakyti slapukų veikimo. Plačiau skaitykite: "privatumo politika".